Skip to content

Steam Iron of Philips | Brand Steam Iron BEST SOUTION 2022

Steam Iron of Philips | Brand Steam Iron BEST SOUTION 2022
Spread the love

Steam Iron of Philips | Brand Steam Iron BEST SOUTION 2022

Topic:Steam Iron of Philips

Philips Steam Iron GC1905 1440-Watt Buy Now Amazon

Steam Iron of Philips | Brand Steam Iron BEST SOUTION 2022



  • To Prevent Water Leakage, keep the iron horizontal when not in use, do not fill water completely, leave some gap and wait for some time for the iron to heat up before using the iron
  • Easy and super fast filling of the watertank,Easy and super fast emptying of the watertank,A fine spray evenly moistens the fabric
  • Continuous steam output up to 13 g/min,Aluminium soleplate for easy gliding on all fabrics
  • Warranty: 2 years on product,Power: 1440 watts ; Power Input: 240V and Frequency: 50 Hz ; Water tank capacity: 180ml ; Power cord length: 1.8m ; Calc clean solution: Self clean
  • Knob should always be at no steam position when product is not in use. Second and third setting is used only when soleplate is hot. Otherwise leakage will happen


Perfect Ironing Steam Iron of Philips Results in Single Stroke

Faster, from start to finish!

The Philips GC1905/21 Steam Iron with its 1440 Watt power enables constant high steam output and heats up the iron quickly, so you get perfect results in single stroke.

With continuous steam output up to 17g/min, you get the perfect amount of steam steadily for a great performance. Steam boost helps remove even the most stubborn creases

Continuous Steam up to 17g/min with 120g Steam Boost

Continuous steam up to 17 g/min for steady performance. The iron’s steam boost and spray function enables you to easily remove even the most stubborn creases.

Even distribution of heat with American Heritage Black Linished Soleplate

Your Philips iron comes with American Heritage Black Linished soleplate for great gliding performance on all fabrics.

Steam Iron of Philips Faster Set-up and Storage

Easy and super fast filling of the water tank thanks to the huge filling hole, and the sideways opening door of the Philips iron.

Quality Iron for power users with effective spray & steam function | Review | Guide | Steam Iron of Philips Tips

I got this one on-demand from mother. For a few days, she was insisting on buying one iron for daily chores. I was already researching iron for one of my friends. So this search did not last long. 😀

Even earlier, Philips was the only name that came to my mind due to its consistency & product quality. I also had Bajaj, Usha, Morphy in the list. But trust in Philips did not let me go for any other brand.

I got this Iron well in one piece and without any scratches on the soleplate.

I got this one on-demand from mother. For a few days, she was insisting on buying one iron for daily chores. I was already researching iron for one of my friends. So this search did not last long. 😀

Even earlier, Philips was the only name that came to my mind due to its consistency & product quality. I also had Bajaj, Usha, Morphy in the list. But trust in Philips did not let me go for any other brand.

I got this Iron well in one piece and without any scratches on the soleplate.


→Steam Iron inside a poly pack
→Instruction leaflet/Warranty card


Wattage: 1440 watt
Weight: ~1 kg
Water Capacity: 180 ml
Cord length: 1.8 meter
Indicator: on/off (based on temperature setting)
Max Water level marking
Warranty: 2 years


1. Good quality iron with effective ironing & steaming.
2. Body is solid with good finish overall at this range.
3. Linished- Teflon coated soleplate for easy gliding on all fabrics. Gliding is somewhat limited in steam mode due to moisture.
4. Sufficiently long cable with swivel joint at iron for easy movement and usage.
5. Capacity of the water tank is sufficient for average steaming operation (30 min or more in one fill).
6. Spray function is well designed, it evenly sprays water and not just throws a fine jet of water.
7. The spray function produces a fine mist that evenly moistens the fabric, making it easier to iron out tough creases.
8. Wattage (1440w) is sufficient enough for home usage and can easily cover tough wrinkles and heavy clothes.
9. Easy and fast filling of the tank owing to the huge filling hole.
10. Easy and complete emptying of the water tank owing to the large hole, and the sideways opening door.
11. Weight on the ok side, not a lightweight but not even heavyweight. Some weight is useful as it helps ironing by applying pressure on the cloth. (Empty iron is lightweight only.)


1. Steam control knob looks loose at first, but it works well in the long run.
2. Water movement during iron creates jerks and affects smooth operation. But that’s the way it will work & you can’t do anything.
3. For regular lightweight iron users, it will appear bulky at first. But you get used to it in a few days.
4. No steam burst function in this model GC1905 but you get what you pay for.

▶ Cons are temporary and don’t affect functionality in the long run. So a ★★★★★ device.


Spray Button
→ push to spray

Steam Knob
→ Off: no steam
→ Low: less steam
→ High: high steam
→ Calc clean mode: calcium deposit cleaning (more below)

Temperature Dial
→ Rotate to set temperature cutoff for different fabric types (Linen, Cotton, Woolen, Silk, etc)


1. Keep knob & dial in off position.
2. Fill the tank to the max level if planning to use steam function.
3. Connect to mains.
4. Set the temperature control knob to the required position.
5. Let it warm up until the indicator goes off.
6. Now operate steam knob to low or high steam.
7. Enjoy ironing or steaming without interruption till water lasts.
8. Use water spray function as required.


1. Use RO filtered water if possible as it’s low in hardness and will ensure the longevity of iron without choking the vents or orifices.
2. let the iron heat properly before use. Leakage has been observed if one uses the Iron without heating properly as water will directly pass from vents without getting converted to steam.
3. Gently clean soleplate and don’t use any hard material or chemicals.
4. Emptying water tank every time after usage is recommended to avoid scaling problem. As calcium deposits are more in standing water.
5. Untangle & straighten the cord once after every use before storage. As these cords tend to develop sharp irrecoverable turns over time and those are hot zones for cable failure.
6. When not using steam function keep the steam knob in off position.
7. Use calc clean mode once in 2 weeks if using normal tap water with medium hardness. If water is very hard, increase the frequency or if using RO water decrease frequency.
8. Once in a few months clean steam control needle using vinegar. To remove the needle, rotate the knob to calc clean mode and gently pull it out.
9. Last but most important, use a properly earthed wall socket for iron to avoid shocks.


This iron has a calc cleaning mode to descale it. To do so follow the steps below:

1. Keep knob in the steam off position.
2. Fill tank to max level.
3. Rotate temperature dial to max position and wait for the indicator to go off.
4. Take out socket from mains and move iron to sink.
5. Turn the steam knob to calc clean position and pull it up a few cms.
6. Let all water be used up.
7. Steam and hot water come out along with calcium deposits.

▶ The principle behind this function is a sudden change in temperatures of inside zone, which leads to contraction & expansion resulting in scaling shredding and flush out.

CLARIFICATION: DAMAGE TO BODY OR PLATE & OTHER ISSUES (concerns raised by other users)

Several users posted about the damaged product or soleplate on arrival and other usage issues. Steam Iron of Philips Let me put my insights into those.

→ I had no issue with the quality of the product delivered. It arrived in proper condition without any damage anywhere, as proper care was taken for this using air cushions. Maybe their seller was careless enough and that resulted in damage during transit.

→ Soleplate had no marks on it. Yes, here Philips can provide a protective sticker or film on the plate which will reduce the ratio of complaints, for the damaged sole plate on arrival.

→ Temperature dial works properly and markings are intact after months of usage.

→ Slight difference in color tone maybe there across different zones, as different materials are used as per requirement. Say hot zone near plate vs cold zone at back.

→ Leakage will be there if the steam knob is in steam position and iron is not sufficiently hot to convert incoming water. So it’s passed directly, & appears as leakage. Philips has explicitly mentioned this in product details.


▶ Remember to order it from a reputed seller. Check seller ratings, reviews and amazon verified tag to avoid any issues, like the faulty product, duplicate product, etc.

DON’T GET CONFUSED (There’s No Steam Burst Mode Here)

1. Some of the photos displayed are with steam burst function symbol on the button & even some users have mentioned this in their reviews, but it is not present in this model. Models with the said function have two buttons (for spray & burst) instead of one here (for spray only).

2. Also, steam output at one place is 13g/min, another place 17g/min. Its actually 17g/min.


▶ If you are looking for good quality, durable steaming iron in the 1.5k range, Steam Iron of Philips  is the name you should seek for. This model of Philips has got good build quality & features which are more than enough for an average home user. So at any point, you can go for this model.

▶ If on a lower budget (<1k range) you can go for Steam Iron of Philips  GC1011 1200w or Bajaj MX 3 1250w but both are low power and Philips one misses steam spray function too. But still, both will cover most of the usage pattern of a home user.

▶ Heavy users may go for Steam Iron of Philips EasySpeed Plus GC2040 2100w or Black+Decker BD BXIR2001IN 2000w or Morphy Richards Super Glide 2000w in 2k range.

→ Unlike regular lightweight irons, steam irons generally don’t go easy with repairs.

→ Unlike regular iron, If the coil is damaged in the steam iron whole of the bottom plate needs to be replaced & if you are out of warranty it will cost you a lot. In fact, for the cost of the plate plus a few bucks, you get a new iron.

→ So, check your requirement for regular vs steam iron & choose wisely.


What type of water should I use

Your appliance has been designed to be used with tap water. In case you live in an area with hard water, fast scale build-up may occur. Therefore, it is recommended to use distilled or de-mineralized water to prolong the lifetime of your appliance.

Do not add perfume, water from tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other chemicals as they may cause water spitting, brown staining, or damage to your appliance.

The Calc-Clean function does not work (properly). How to use the Calc-Clean function

The Calc-Clean function removes scale and impurities.
To do so, set the Steam Dial to position ‘0’, set the temperature dial to ‘MAX’, and fill water tank up to the
‘MAX’ level.
Then heat up the iron until the pilot light below the handgrip goes out.
Remove the mains plug from the wall socket and hold the iron horizontally over the sink.Then set the Steam Dial to ‘CALC CLEAN’ position and pull it slightly upwards.
Move the iron forwards and backwards while boiling water/steam squirt from the holes in the soleplate to
wash away impurities/scales. When the water tank is empty, replace the Steam Dial and heat up the iron to dry it.
Finally move the iron to and fro on a piece of cloth to dry the soleplate. Repeat the process if necessary.

The iron does not produce any steam only Steam Iron of Philips

Scenario 1:
The steam control may have been set to the zero steam position. Put the steam control into position.
Scenario 2:
There is no water in the tank and/or the settings are not correct.
Step 1 : Ensure there is water in the tank.
Step 2 : Set to the appropriate steam and temperature settings as shown in table .
Green area – Steaming possible
Scenario 3:
The Steam vents of the soleplate maybe blocked by impurities (e.g. calc)
Perform calc-cleaning or decalcification on your iron.
Kindly refer to your user manual or this website for cleaning maintenance advice

White particles (scale) come out of the holes of the soleplate.

You probably live in an area with hard water. Hard water causes scale build-up inside the appliance.
Use the Calc-Clean function a few times to remove scale from the iron before you start using the appliance
again (see chapter ‘Cleaning and maintenance’ in the directions for use).

Fabrics stick to the soleplate Steam Iron of Philips

Fabrics may stick to the soleplate when they are ironed at too high temperatures.
To avoid sticking, you should follow the instructions in the fabric table in your instruction booklet.
Try a lower temperature setting. Also, to prevent sticking you can put a cloth (e.g. a tea towel) between the
iron and the fabric.

Water leaks from the soleplate while the iron is cooling down or after it has been stored.

The iron does NOT have Drip-Stop function. Before storing the iron, empty the water tank and set the steam control to
position ‘0’. Place the iron on its heel, i.e. store in a vertical position.

Water drips from the holes of the soleplate during ironing. What should I do?

1) Your iron produces a lot of steam. Steam could have condensed on the board cover, making it wet and
leaving water marks on your garment when the iron is pressed on it. Refer to the question related to water
leakage due to board condensation.
2) Ironing aids or fragranced water could have been added to the water tank. This retards the steaming
function, causing water to leak. Use only facuet water or distilled water or a mix of both.


Leave a Reply

Your email address will not be published.